PIP-5MP2125SB-ADF28KM-I0 Uniview 5MP HD IP Bullet Camera with Infrared from PolarisUSA

PIP-5MP2125SB-ADF28KM-I0

PIP-5MP2125SB-ADF28KM-I0: Uniview 1/2.7" 5MP HD IP Bullet Camera with IR, PS CMOS, 2.8mm lens, 98 ft IR Distance, Built-In Mic, Ultra 265/H.264/MJPEG, Human Body/Vehicle Detection, 0.005Lux Starlight, Micro SD, PoE, IP67, 12VDC, NDAA Compliant

Warranty: 3 Year(s)

Rating:

[N/A]

In Stock Soon! Order Yours NOW!

Add To Cart For Price

Overview

Specs

Downloads

Reviews

Lens Simulator

Product Overview

Key Features:

1/2.7" 5MP Progressive Scan CMOS
Starlight Capability in Low Light Situations
Compression Ultra 265, H.265, H.264, MJPEG
Ensures Ultra-High Image Quality in Low Illumination with LightHunter Technology
Built-In Mic Supported
Supports 9:16 Corridor Mode
Smart IR Provides up to 131 Feet of Infrared
On-Screen Display (OSD) Up to 8 OSDs
Privacy Mask Up to 4 Areas
Region of Interest (ROI) Up To 8 Areas
Motion Detection Up To 4 Areas
White Balance - Auto, Outdoor, Fine Tune, Sodium Lamp, Locked, Auto 2
Digital Noise Reduction 2D/3D DNR
Image Flip - Normal, Vertical, Horizontal, 180°, 90° Clockwise/Counter Clockwise
Headlight Compensation (HLC) Supported
BackLight Compensation (BLC) Supported
Audio Compression - G.711
Edge Storage - Micro SD Up To 256GB Capable
Network Storage - Automatic Network Routing (ANR), Network Area Storage (NAS)
Dimensions (mm): 155.9 x 63.1, 62.7
Dimension (inches): 6.1 x 2.5 x 2.5
Surge Protection: 2KV
Ingress Protection: IP67

By adjusting the parameters below you can visualize the effects of different lens focal lengths at various distances to a given scene. Contextual help for the parameters is available by hovering the circular help icons.

Please note that the images used here were taken with a digital SLR, and are much higher quality than you can expect from a security camera. The purpose of this tool is to simulate field of view, not image quality.

HINT: After inputing a number in one of the fields, press [TAB] to recalculate.

Simulator Mode

Scene Image:

Sensor Size: 1/3"

Calculator Mode

Distance from Target: feet

Lens Focal Length: mm

Disclaimer: The images shown are for the purpose of simulation only, actual results may vary.

Viewable Dimensions: X feet

Simulator Mode allows you to choose from several different scenarios and visualize the effects of various lenses at a fixed distance. This mode limits the parameters to realistic ranges for a given scene.

Calculator Mode allows you to input arbitrary values for the parameters, but does not allow you to visualize the scene.

The scene selection (available in Simulator Mode only) allows you to choose from several scenarios, to better help you visualize your lens selection.

The sensor size refers to the size of the imager array. Choosing the incorrect size will have an adverse effect on the field of view calculations, so be sure and check your camera specifications for the correct size. If you are using the Lens Simulator on a product page, this value will be preset for you.

This refers to the distance of the camera from the target scene you are trying to capture, measured in feet. In Simulator Mode, the distance is fixed for each scene and cannot be changed.

The focal length refers to the distance between the sensor and lens aperture, and determines how wide or narrow your angle of view is. Shorter focal lengths provide a wider angle of view, while longer focal lengths give a narrower view angle, allowing you to zoom in on distant objects. You can manually input a focal length or use the slider to the right of the monitor.

These are the dimensions, measured in feet, of the target viewable area (dimensional field of view); in other words, what you will see on your screen. The target area will be calculated based on the distance and focal length, or you can manually input your target area to find out what focal length you would need for that view.

PIP-5MP2125SB-ADF28KM-I0
CALL
Special Order

Image Sensor:	1/2.7 5 Megapixel Progressive Scan, CMOS
Resolution (WxH):	2880x1620 (5MP)
Compression Format:	Ultra H.265/H.265/H.264/MJPEG
Focal Length:	2.8mm
Minimum Illumination (LUX):	0.0
Optical Zoom Factor (nX):	0
Digital Zoom Factor (nX):	0
Focal Application:
Lens Mount:	Built-In Lens
Power Over Ethernet (POE):	Yes
Pan/Tilt:	No
Day/Night Capability:	IR-Cut Filter with Auto Switch (ICR)
Built-In Mic:	Yes
Audio Input:	No
Alarm I/O:	No
Audio Output:	No
Indoor/ Outdoor:	Yes
Infrared Range (ft):	131
Network Function:	IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, SNMP
HD Video Format:	Yes
ONVIF Compliant:	ONVIF (Profile S, Profile G, Profile T), API
Current (mA):	417
Current (W):	5
Power Requirement:	12 V DCÂ±25%, PoE (IEEE802.3 af)
Panoramic View:	No
Ingress Protection:	IP67
Motorized Zoom / Auto Focus:	No
Vandal Resistant:
Starlight:	Yes
Body Style:	Bullet

Filename	Size	Description	Date Added
PIP-5MP2125SB-ADF2840KM-I0 User's Manual.pdf	6.9MB	PIP-5MP2125SB-ADF2840KM-I0 User's Manual	04/19/2021
PIP-5MP2125SB-ADF2840KM-I0 Data Sheet.pdf	647.9KB	PIP-5MP2125SB-ADF2840KM-I0 Data Sheet	04/19/2021

HD-IP

HD Over Coax

CCTV

Parts & Accessories

Radio Programming

Product Overview

Product Specifications

Package Components

Product Reviews