UNV 4K WDR Motorized, Vandal-Resistant Network IR Dome Camera

PIP-8MP3238SB-ADZK-I0

PIP-8MP3238SB-ADZK-I0: Uniview 1/2" 4K Vandal-Proof Network Dome Camera with IR, Ultra 265/H.264/MJPEG, 2.8-12mm Motorized, IR (98 ft.), Human Body/Vehicle Detection, Micro SD (128GB), Audio I/O, Alarm I/O, DC12V, PoE, IK10, IP67, NDAA Compliant

Warranty: 3 Year(s)

Rating:

[N/A]

Add To Cart For Price

Overview

Specs

Downloads

Reviews

Lens Simulator

Product Overview

Key Features:

1/2" Progressive Scan CMOS
8MP (3840x2160)@20fps, 5MP (3072x1725)@30/25fps, 4MP(2560x1440)@30/25fps, 2MP (1920x1080)@30/25fps
Ultra 265, H.265, H.264, MJPEG
LightHunter Technology Ensures Ultra-High Image Quality In Low Light Environments
Human Body and Vehicle Detection
120dB True Wide-Dynamic Range(WDR) Technology for Clear Images in Strong Light Scenes
Supports 9:16 Corridor Mode
2.8-12mm Motorized Zoom Lens
Two-Way Audio - One Channel
Built-In Mic
Alarm In/Alarm Out - One Channel
Smart IR with Auto Switch (ICR) up to 131 Feet (40m)
Wavelength - 850nm
Digital Defog
On-Screen Display (OSD) - Up to 8
Privacy Mask - Up to 4 Areas
Regions of Interest (ROI) - Up to 8 Areas
Motion Detection - Up to 4 Areas
White Balance - Auto/Outdoor/Fine Tune/Sodium Lamp/Locked Out/Auto2
Flip - Normal/Vertical/Horizontal/180°/90°Clockwise/90°Anti-clockwise
Dewarping Supported
Headlight Compensation (HLC) Supported
Back Light Compensation (BLC) Supported
Network Storage- ANR
Supports Micro SD Card (Max 256GB)
Vandal-Resistant - IK10
Water-Resistant - IP67
Surge Protection - 2KV
12VDC±25%, PoE (IEEE 802.3af)
Power Comsumption - Max 9.0 Watts

By adjusting the parameters below you can visualize the effects of different lens focal lengths at various distances to a given scene. Contextual help for the parameters is available by hovering the circular help icons.

Please note that the images used here were taken with a digital SLR, and are much higher quality than you can expect from a security camera. The purpose of this tool is to simulate field of view, not image quality.

HINT: After inputing a number in one of the fields, press [TAB] to recalculate.

Simulator Mode

Scene Image:

Sensor Size: 1/2"

Calculator Mode

Distance from Target: feet

Lens Focal Length: mm

Disclaimer: The images shown are for the purpose of simulation only, actual results may vary.

Viewable Dimensions: X feet

Simulator Mode allows you to choose from several different scenarios and visualize the effects of various lenses at a fixed distance. This mode limits the parameters to realistic ranges for a given scene.

Calculator Mode allows you to input arbitrary values for the parameters, but does not allow you to visualize the scene.

The scene selection (available in Simulator Mode only) allows you to choose from several scenarios, to better help you visualize your lens selection.

The sensor size refers to the size of the imager array. Choosing the incorrect size will have an adverse effect on the field of view calculations, so be sure and check your camera specifications for the correct size. If you are using the Lens Simulator on a product page, this value will be preset for you.

This refers to the distance of the camera from the target scene you are trying to capture, measured in feet. In Simulator Mode, the distance is fixed for each scene and cannot be changed.

The focal length refers to the distance between the sensor and lens aperture, and determines how wide or narrow your angle of view is. Shorter focal lengths provide a wider angle of view, while longer focal lengths give a narrower view angle, allowing you to zoom in on distant objects. You can manually input a focal length or use the slider to the right of the monitor.

These are the dimensions, measured in feet, of the target viewable area (dimensional field of view); in other words, what you will see on your screen. The target area will be calculated based on the distance and focal length, or you can manually input your target area to find out what focal length you would need for that view.

PIP-8MP3238SB-ADZK-I0
CALL
Special Order

Image Sensor:	1/2" Progressive Scan CMOS
Resolution (WxH):	3840x2160
Compression Format:	Ultra H.265/H.265/H.264/MJPEG
Focal Length:	2.8-12mm Motorized
Minimum Illumination (LUX):	0.0
Optical Zoom Factor (nX):	0
Digital Zoom Factor (nX):	0
Focal Application:	Varifocal
Lens Mount:	Built-In Lens
Power Over Ethernet (POE):	Yes
Pan/Tilt:	No
Day/Night Capability:	Mechanical D/N
Built-In Mic:	Yes
Audio Input:	Yes
Alarm I/O:	Yes
Audio Output:	Yes
Indoor/ Outdoor:	Yes
Infrared Range (ft):	98
Network Function:	IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP, QoS
HD Video Format:	Yes
ONVIF Compliant:	ONVIF (Profile S, Profile G, Profile T), API
Current (mA):	667
Current (W):	8
Power Requirement:	12V DC
Panoramic View:	No
Ingress Protection:	IP67
Motorized Zoom / Auto Focus:	Yes
Vandal Resistant:	IK10
Starlight:	No
Body Style:	Dome

Filename	Size	Description	Date Added
IPC3238SB Camera Installation Guide-V1.00.pdf	6.4MB	IPC3238SB Camera Installation Guide-V1 00	11/15/2021
IPC3238SB-ADZK-i0 Network Cameras User Manual-V2.08.pdf	6.9MB	IPC3238SB-ADZK-I0 Network Cameras User Manual-V2 08	11/15/2021
PIP-8MP3238SB-ADZK-I0 HD LighterHunter IR VF Dome Network Camera V1.3.pdf	733.6KB	PIP-8MP3238SB-ADZK-I0 HD LighterHunter IR VF Dome Network Camera V1 3	11/15/2021

HD-IP

HD Over Coax

CCTV

Parts & Accessories

Radio Programming

Product Overview

Product Specifications

Package Components

Product Reviews