Uniview 4MP WDR Vandal-resistant Network IR Fixed Dome Camera

PIP-4MP324ER3-DVPF28

PIP-4MP324ER3-DVPF28: Uniview 4MP Fixed Lens Water-Resistant IR Vandal Dome Network Camera, 1/3" Progressive Scan CMOS, 2.8mm lens, IR Distance up to 98 feet, Configurable Smart IR feature, IP67, 12VDC, PoE (up to 5.5W)

Warranty: 3 Year(s)

Rating:

[N/A]

Add To Cart For Price

Overview

Specs

Downloads

Reviews

Lens Simulator

Product Overview

Key Features:

Optics

Day/night functionality

Smart IR, up to 30m (98ft) IR distance

Up to 120 dB WDR (Wide Dynamic Range)

2D/3D DNR (Digital Noise Reduction)

Compression

Ultra 265, H.264, MJPEG

ROI (Region of Interest)

Customized OSD

Network

ONVIF Conformance

Structure

Wide temperature range: -35°C ~ 60°C (-31°F ~ 140°F)

Wide input voltage range of ±25%

IK10 vandal resistant

IP67

3-Axis

> 120 dB WDR	> 98FT IR Range	> ONVIF Conformance
> 4MP CMOS	> Cloud P2P	> Cloud Firmware Updates
> Ultra H.265 / MJPEG	> IP67 / IK10	> Triple streams



Feature Showoff

By adjusting the parameters below you can visualize the effects of different lens focal lengths at various distances to a given scene. Contextual help for the parameters is available by hovering the circular help icons.

Please note that the images used here were taken with a digital SLR, and are much higher quality than you can expect from a security camera. The purpose of this tool is to simulate field of view, not image quality.

HINT: After inputing a number in one of the fields, press [TAB] to recalculate.

Simulator Mode

Scene Image:

Sensor Size: 1/3"

Calculator Mode

Distance from Target: feet

Lens Focal Length: mm

Disclaimer: The images shown are for the purpose of simulation only, actual results may vary.

Viewable Dimensions: X feet

Simulator Mode allows you to choose from several different scenarios and visualize the effects of various lenses at a fixed distance. This mode limits the parameters to realistic ranges for a given scene.

Calculator Mode allows you to input arbitrary values for the parameters, but does not allow you to visualize the scene.

The scene selection (available in Simulator Mode only) allows you to choose from several scenarios, to better help you visualize your lens selection.

The sensor size refers to the size of the imager array. Choosing the incorrect size will have an adverse effect on the field of view calculations, so be sure and check your camera specifications for the correct size. If you are using the Lens Simulator on a product page, this value will be preset for you.

This refers to the distance of the camera from the target scene you are trying to capture, measured in feet. In Simulator Mode, the distance is fixed for each scene and cannot be changed.

The focal length refers to the distance between the sensor and lens aperture, and determines how wide or narrow your angle of view is. Shorter focal lengths provide a wider angle of view, while longer focal lengths give a narrower view angle, allowing you to zoom in on distant objects. You can manually input a focal length or use the slider to the right of the monitor.

These are the dimensions, measured in feet, of the target viewable area (dimensional field of view); in other words, what you will see on your screen. The target area will be calculated based on the distance and focal length, or you can manually input your target area to find out what focal length you would need for that view.

PIP-4MP324ER3-DVPF28
CALL
Special Order

Image Sensor:	1/3", Progressive Scan,4.0 Megapixel, CMOS
Resolution (WxH):	2560x1440
Compression Format:	Ultra H.265/H.265/H.264/MJPEG
Focal Length:	2.8mm
Minimum Illumination (LUX):	0.0
Optical Zoom Factor (nX):	0
Digital Zoom Factor (nX):	0
Focal Application:
Lens Mount:
Power Over Ethernet (POE):	Yes
Pan/Tilt:	No
Day/Night Capability:	Mechanical D/N
Built-In Mic:	No
Audio Input:	Yes
Alarm I/O:	Yes
Audio Output:	Yes
Indoor/ Outdoor:	Yes
Infrared Range (ft):	98
Network Function:	IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP, QoS
HD Video Format:	Yes
ONVIF Compliant:	ONVIF(Profile S, Profile G), API
Current (mA):
Current (W):	0
Power Requirement:	12V DC
Panoramic View:	No
Ingress Protection:	IP67
Motorized Zoom / Auto Focus:	No
Vandal Resistant:	IK10
Starlight:	No
Body Style:	Dome

Filename	Size	Description	Date Added
PIP-4MP-324ER3-DVPF28.pdf	439.4KB	PIP-4MP-324ER3-DVPF28	06/18/2018

HD-IP

HD Over Coax

CCTV

Parts & Accessories

Radio Programming

Product Overview

Optics

Compression

Network

Structure

Product Specifications

Package Components

Product Reviews