CCTV Indoor & Outdoor Cameras - PVCVI-2MP4n1-BTWH

PVCVI-2MP4n1-BTWH

PVCVI-2MP4n1-BTWH: PolarisUSA 1/2.7" 2MP High Definition Bullet Camera, HD-CVI, HD-TVI, AHD, CVBS, 30fps1080P, 3.6mm lens, 18 SMD IR LEDs, IP66, 12VDC, White

Warranty: 3 Year(s)

Rating:

[5/5]

Qty.

Product

Price

PVCVI-2MP4n1-BTWH

Total:

Overview

Specs

Reviews

Lens Simulator

Product Overview

The famous 4-In-1 Cameras are selling like hotcakes. These cameras are beautiful, easy to use and fit into just about any application.

Features:

1/2.7" 2 Megapixel (MP) CMOS
1000+ TVL in CVBS Mode
4 Cameras in One - HD-CVI, HD-TVI, Analog High Definition (AHD), Analog (CVBS)
30fps@1080P
Infrared LEDs - 36, 850nm Frequency
Minimum Illumination - 0.05 Lux@F1.2 (IR Off)
Built-In Infrared (IR) LEDs for up to 100ft of IR
3.6mm Fixed Lens
Auto White Balance (AWB)
Water-Resistant, IP66
Available in Charcoal Grey and White
Operating Temperature: -20°C to 50°C (-4°F to 122°F)
Dimension (inches): 2.76(H) x 7.13(L)
12VDC (Optional)

By adjusting the parameters below you can visualize the effects of different lens focal lengths at various distances to a given scene. Contextual help for the parameters is available by hovering the circular help icons.

Please note that the images used here were taken with a digital SLR, and are much higher quality than you can expect from a security camera. The purpose of this tool is to simulate field of view, not image quality.

HINT: After inputing a number in one of the fields, press [TAB] to recalculate.

Simulator Mode

Scene Image:

Sensor Size: 1/3"

Calculator Mode

Distance from Target: feet

Lens Focal Length: mm

Disclaimer: The images shown are for the purpose of simulation only, actual results may vary.

Viewable Dimensions: X feet

Simulator Mode allows you to choose from several different scenarios and visualize the effects of various lenses at a fixed distance. This mode limits the parameters to realistic ranges for a given scene.

Calculator Mode allows you to input arbitrary values for the parameters, but does not allow you to visualize the scene.

The scene selection (available in Simulator Mode only) allows you to choose from several scenarios, to better help you visualize your lens selection.

The sensor size refers to the size of the imager array. Choosing the incorrect size will have an adverse effect on the field of view calculations, so be sure and check your camera specifications for the correct size. If you are using the Lens Simulator on a product page, this value will be preset for you.

This refers to the distance of the camera from the target scene you are trying to capture, measured in feet. In Simulator Mode, the distance is fixed for each scene and cannot be changed.

The focal length refers to the distance between the sensor and lens aperture, and determines how wide or narrow your angle of view is. Shorter focal lengths provide a wider angle of view, while longer focal lengths give a narrower view angle, allowing you to zoom in on distant objects. You can manually input a focal length or use the slider to the right of the monitor.

These are the dimensions, measured in feet, of the target viewable area (dimensional field of view); in other words, what you will see on your screen. The target area will be calculated based on the distance and focal length, or you can manually input your target area to find out what focal length you would need for that view.

PVCVI-2MP4n1-BTWH
$59.95
In Stock

Image Sensor:	1/2.7â€ 2 Megapixel CMOS
Effective Pixels:	1920(H)X1080(V)
Resolution (WxH):	1920x1080
TVI:	2MP
CVI:	2MP
AHD:	2MP
CVBS:	Yes
Video Frame Rate:	30fps@1080P
Video Output:	75 Ohm BNC for HD-CVI
Starlight:	No
Minimum Illumination (LUX):	0.0
Infrared Range (ft):	100
Focal Length:	3.6mm
Motorized Zoom / Auto Focus:	No
Day/Night:	Yes
Indoor/ Outdoor:	Yes
Ingress Protection:	IP66
Dimensions (in.):
Current (mA):	350
Power Requirement:	12V DC
Body Style:	Bullet

HD-IP

HD Over Coax

CCTV

Parts & Accessories

Radio Programming

Product Overview

Product Specifications

Package Components

Product Reviews