HD-IP Cameras - PIP-2MP-PTZ10X

PIP-2MP-PTZ10X

PIP-2MP-PTZ10X: PolarisUSA 1/2.7" OmniVision 2MP CMOS Sensor Hisilicon Hi3516C, Main Stream: 1080P30fps, IR-CUT 10X, 5-50mm lens, 12V DC, IP66

Warranty: 30 Days

Rating:

[N/A]

Clearance Level 1 - This is a discontinued product, but the product itself is new and has never been used. Clearance items are not returnable and carry no warranty. If the item arrives defective we will either replace it or provide store credit if no replacement is available.

Clearance

WAS

$499.95

Discontinued: Only 1 left!

Qty.

Product

Price

PIP-2MP-PTZ10X

Total:

Overview

Specs

Downloads

Reviews

Lens Simulator

Product Overview

Another amazing new camera from PolarisUSA Video! Introducing the PIP-2MPPTZ10X Pan/Tilt/Zoom IP Color Camera. With 2 Megapixel clarity, the camera is a must have for your new IP System with the latest features that all the best Pan/Tilt/Zoom (PTZ) cameras have to offer.

Features:

1/3" Progressive Scan CMOS
Low Illumination: Color Mode: 0.01 Lux; B/W Mode: 0.0
Electronic Shutter: NTSC: 1/30~1/8,000 s; PAL: 1/25~1/8,000 s
White Balance: Auto/Manual
Auto Iris Control: DC drive
Video System: NTSC
Video Compression: H.264 dual streaming / MJPEG
Maximum Frame: NTSC: 30fps; PAL: 25fps
Output Bit Rate: 128Kbps~6Mbps
Main Resolution: 1920*1080、1280*720 @30fps
Second Stream:1280*720、640*480、352*288
Motion Detection
Wind/Water Resistant - IP66
Network: 1 of RJ45 10/100M adaptive to POE
Network Protocol: TCP/IP, HTTP, ICMP, PPPoE, DHCP, UDP, SMTP, RTP, RTSP, SNMP, ARP
Dimension(mm): 28 × 32 × 20
Working Temperature: -10℃ ~ 50℃ (14°F ~ 122°F)
Working Humidity: 0~95% RH (non-condensing)
Support Multi-User Real-Time Access and Parameter Configuration through the Web Server
12VDC power supply included

5MP Resolution Chart

By adjusting the parameters below you can visualize the effects of different lens focal lengths at various distances to a given scene. Contextual help for the parameters is available by hovering the circular help icons.

Please note that the images used here were taken with a digital SLR, and are much higher quality than you can expect from a security camera. The purpose of this tool is to simulate field of view, not image quality.

HINT: After inputing a number in one of the fields, press [TAB] to recalculate.

Simulator Mode

Scene Image:

Sensor Size: 1/3"

Calculator Mode

Distance from Target: feet

Lens Focal Length: mm

Disclaimer: The images shown are for the purpose of simulation only, actual results may vary.

Viewable Dimensions: X feet

Simulator Mode allows you to choose from several different scenarios and visualize the effects of various lenses at a fixed distance. This mode limits the parameters to realistic ranges for a given scene.

Calculator Mode allows you to input arbitrary values for the parameters, but does not allow you to visualize the scene.

The scene selection (available in Simulator Mode only) allows you to choose from several scenarios, to better help you visualize your lens selection.

The sensor size refers to the size of the imager array. Choosing the incorrect size will have an adverse effect on the field of view calculations, so be sure and check your camera specifications for the correct size. If you are using the Lens Simulator on a product page, this value will be preset for you.

This refers to the distance of the camera from the target scene you are trying to capture, measured in feet. In Simulator Mode, the distance is fixed for each scene and cannot be changed.

The focal length refers to the distance between the sensor and lens aperture, and determines how wide or narrow your angle of view is. Shorter focal lengths provide a wider angle of view, while longer focal lengths give a narrower view angle, allowing you to zoom in on distant objects. You can manually input a focal length or use the slider to the right of the monitor.

These are the dimensions, measured in feet, of the target viewable area (dimensional field of view); in other words, what you will see on your screen. The target area will be calculated based on the distance and focal length, or you can manually input your target area to find out what focal length you would need for that view.

PIP-2MP-PTZ10X
$499.95
In Stock

Image Sensor:	1/3" Progressive Scan CMOS
Resolution (WxH):	1920x1080
Compression Format:	H.264
Focal Length:	5-50mm
Minimum Illumination (LUX):	0.0
Optical Zoom Factor (nX):	10
Digital Zoom Factor (nX):	10
Focal Application:	Varifocal
Lens Mount:	Built-In Lens
Power Over Ethernet (POE):	No
Pan/Tilt:	Yes
Day/Night Capability:	Mechanical D/N
Built-In Mic:	No
Audio Input:	No
Alarm I/O:	Yes
Audio Output:	No
Indoor/ Outdoor:	Yes
Infrared Range (ft):	164
Network Function:	TCP/IP, HTTP, ICMP, PPPoE, DHCP, UDP, SMTP, RTP, RTSP, SNMP, ARP
HD Video Format:	Yes
ONVIF Compliant:
Current (mA):
Current (W):	0
Power Requirement:	12V DC
Panoramic View:	No
Ingress Protection:	IP66
Motorized Zoom / Auto Focus:	No
Vandal Resistant:
Starlight:	No
Starlight:	No
Body Style:	PTZ
Body Style:	PTZ

Filename	Size	Description	Date Added
HD IP CAMERA ENGLISH MANUAL.doc	7.9MB	HD IP CAMERA USERS MANUAL	02/21/2020
IPWizardIII_2.0.3(English).exe	2.2MB	IPWizardIII 2 0 3(English)	02/21/2020
PIP-2MP-PTZ10X User's Manual.pdf	2.1MB	PIP-2MP-PTZ10X User's Manual	02/21/2020

HD-IP

HD Over Coax

CCTV

Parts & Accessories

Radio Programming

Product Overview

Product Specifications

Package Components

Product Reviews